Pipeclamp Components

Viewing 312 of 320.
grid
list
In Stock
An adjustable structural base fitting for the vertical. The design of this Key Clamp fitting will only allow it to be installed in the correct plane. For correct orientation see details below.
£17.34
(ex. VAT)
In Stock
Bracket (made from Ductile Iron) for supporting the 42.4mm o/d handrail tube to a wall. The 42.4mm o/d tube is fixed to the DDA03 using either 2 x self tapping screws or 2 x pop rivets.
£17.38
(ex. VAT)
In Stock
Bracket (made from Ductile Iron) for terminating the 42.4mm o/d handrail tube back to a wall. This bracket is used in conjunction with a 150-3 connector.
In Stock

40 x 40 square x 2mm thick - Galvanised Square Tube 1.5metres or cut to any lengths to suit requirements, additional haulage and cutting costs may apply - please contact us for further info.

£18.64
(ex. VAT)
In Stock
Fitting (made from Ductile Iron) for creating an adjustable bend between the horizontal and the vertical. This bracket is used in conjunction with 2 x 150-3(expanding connector).
In Stock

33.7mm dia. x 3.2mm thick - Natural Self Colour Round Tube 3.2M Length 

In Stock

25 x 25 square x 2mm thick - Galvanised Square Tube 3M Length or cut to any lengths to suit requirements, additional haulage and cutting costs may apply - please contact us for further info.

In Stock

40 x 40 square x 2mm thick - Galvanised Square Tube 3M Length or cut to any lengths to suit requirements, additional haulage and cutting costs may apply - please contact us for further info.

In Stock

DDA Intermediate Flat Base Post for DDA compliant handrail. Available in upright tube size 48.3mm and 1100mm high overall (rails to suit 42.4mm) from stock or other sizes and heights available to order.

In Stock

DDA Terminated Flat Base Post for DDA compliant handrail. Available in upright tube size 48.3mm and 1100mm high overall (rails to suit 42.4mm) from stock or other sizes and heights available to order.

In Stock

DDA Intermediate Side Base Post for DDA compliant handrail. Available in upright tube size 48.3mm and 1100mm high overall (rails to suit 42.4mm) from stock or other sizes and heights available to order.

In Stock

DDA Terminated Side Base Post for DDA compliant handrail. Available in upright tube size 48.3mm and 1100mm high overall (rails to suit 42.4mm) from stock or other sizes and heights available to order.

In Stock

DDA Intermediate Slope Base Post for DDA compliant handrail. Available in upright tube size 48.3mm and 1100mm high overall (rails to suit 42.4mm) from stock or other sizes and heights available to order.

In Stock

DDA Terminated Slope Base Post for DDA compliant handrail. Available in upright tube size 48.3mm and 1100mm high overall (rails to suit 42.4mm) from stock or other sizes and heights available to order.

£45.36
(ex. VAT)
In Stock
Dual sized ratchet key. The ratchet has two removable hexagon socket heads to enable the complete range of Pipeclamp fitting to be tightened. The use of the ratchet enables the grubscrews to be tightened to the correct torque.
In Stock

Adjustable(to any angle handrail) Wall-to-Floor Stair DDA Handrail Kit. Available in upright tube size 48.3mm and 1100mm high overall (rails to suit 42.4mm). Side mounting or flat base mounting (so may require cutting back, we can do in-house if required). Tube for rail supplied as standard length's either 1070mm or 1600mm long (again may require cutting back...). Other bespoke made sizes can be made to order upon request.

In Stock
  • Universal fittings to fix most leading brand chop saws securely.
  • Bespoke table height setting with adjustable legs.
  • Left and right work arms extend the workpiece support.
In Stock

DDA Ramp Handrail Side mount or Slope mounted Handrail Kit. Available as standard in tube size 42.4mm (48.3mm upon request). Tube for upright posts supplied 1070mm long to suit side mounting or flat base mounting (so may require cutting back, we can do in-house if required). Tube for rails supplied as standard length's either 160mm, 2100mm, 3200mm, 4800mm or 6400mm ( other lengths available if required). 



Out of Stock

Faster than a band saw, less dust, heat & mess than abrasive discs, the Evolution 355mm mild-steel cutting 60 tooth saw blade is designed to deliver maximum cutting performance and precision to metalworkers and fabricators.

Evolution saw blades  deliver maximum performance by using the highest grade carbide, hardened blade bodies & ultra high-grade brazing techniques. All offer premium quality to increase production & performance!

If you need faster, more accurate, cleaner metal cuts that are cool enough to handle immediately and ready to weld straight off the saw then it’s time to start cutting with Evolution’s TCT metal cutting blades.

Compatible with the Evolution SS355CPS - 355mm Chop Saw.

In Stock

Adjustable(to any angle handrail) Wall-to-Floor Stair DDA Handrail Kit(2 rails). Available in upright tube size 48.3mm and 1100mm high overall (rails to suit 42.4mm). Side mounting or flat base mounting (so may require cutting back, we can do in-house if required). Tube for rails supplied as standard length's either 1070mm or 1600mm long (again may require cutting back...). Other bespoke made sizes can be made to order upon request.

In Stock

Adjustable(to any angle handrail) Stair DDA Handrail Kit (2 uprights, 1 rail). Available in upright tube size 48.3mm and 1100mm high overall (rails to suit 42.4mm). Side mounting or flat base mounting (so may require cutting back, we can do in-house if required). Tube for rail supplied as standard length's either 1070mm or 1600mm long (again may require cutting back...). Other bespoke made sizes can be made to order upon request.

In Stock

Evolution 355mm 90 tooth blade for cutting stainless steel is compatible with the Evolution S355CPS. Evolution saw blades are designed to deliver maximum performance by using the highest grade carbide, hardened blade bodies & ultra high-grade brazing techniques. All offer premium quality to increase production & performance!

Designed specifically to cut 302, 303 & 304 grades of Stainless Steel only.

In Stock

Evolution 355mm, 80 Tooth, Tungsten Carbide Tipped, Aluminium Cutting Chop Saw Blade. Compatible with all our 355mm Chop Saws. This blade uses the highest-grade Japanese sourced carbide, a hardened steel blade body and ultra-precise brazing to create a fast cutting, long-lasting and vibration free saw blade.

Designed with a tooth count and profile designed to maximise cutting life this Aluminium Chop Saw blade is ideal for all grades of aluminium and suitable for Non-ferrous metals. It has a narrow Kerf design that keeps wasted material to a minimum and saves you money with every cut

In Stock

Evolution 355mm 90 tooth blade for cutting thin steel. Evolution saw blades are designed to deliver maximum performance by using the highest grade carbide, hardened blade bodies & ultra high-grade brazing techniques. All offer premium quality to increase production & performance!

Built for our Heavy Duty metal fabrication Saw the S355CPS this blade will power through narrow gauge profile and sheet steel with ease.