Swivel Fittings
From £1.90
(ex. VAT)
Key Clamp Single male fitting with only 1 lug.
From £2.04
(ex. VAT)
This fitting is designed to be used in conjunction with the “M” fittings and is not generally used on its own. This can be connected to the “M” fitting by either rivet or nut and bolt.
From £3.18
(ex. VAT)
A double male fitting with the lugs at 180° to each other.
From £3.50
(ex. VAT)
As shown, priced and sold as a single fitting but normally used in pairs to create angles between 85° and 235°. A central tube is required to join the (Key Clamp) fittings together to create the angle. When working out the correct tube length dimension ‘C’ should be subtracted.
From £3.84
(ex. VAT)
Double male fitting with the 2 lugs at 90° to each other.
From £4.20
(ex. VAT)
Key Clamp Complete single swivel. The swivel has a travel of approximately 85° from the horizontal in both vertical directions.(Kee Klamp compatible C50)
From £4.75
(ex. VAT)
This fitting is designed to be used in conjunction with the “M” fittings and is not generally used on its own. This can be connected to the “M” fitting by either rivet or nut and bolt.
From £4.92
(ex. VAT)
Complete locating swivel. Swivel has a travel of approximately 85 from the vertical in each direction.
From £5.98
(ex. VAT)
Key Clamp Complete single swivel. The swivel has a travel of approximately 85° from the horizontal in both vertical directions.(Kee Klamp compatible C50)
From £6.21
(ex. VAT)
Complete locating swivel. Swivel has a travel of approximately 85 from the vertical in each direction.
From £7.79
(ex. VAT)
Complete double swivel with the swivel connectors at 180° to each other. Each swivel has a travel of approximately 85° from the horizontal in both vertical directions.
From £8.09
(ex. VAT)
Complete double swivel with the swivel connectors at 90° to each other. Each swivel has a travel of approximately 85° from the horizontal on both vertical directions.