Connectors

Viewing 11 of 11.

Sort by

179 Locking Collar Key Clamp (33.7mm Black Round)

£1.95

(ex. VAT)

A locking collar used as extra support for a Pipeclamp fitting on structures where the slip load on the grubscrew may be exceeded i.e. racking. Can also be used to support a Key Clamp fitting that is required to be left undone. i.e. a gate hinge.

From £2.33

(ex. VAT)

An inline external tube connector for joining two tubes of the same diameter. This key clamp fitting is not recommended to be used in high load applications. For a smooth inline joint the key clamp fitting 150 can be used.

From £2.54

(ex. VAT)

An inline internal tube connector for joining two tubes of the same diameter. This key clamp fitting can only be used with 3.2mm wall thick tube. This fitting is not recommended for high or tensile load applications.

149 External Joiner Clamp ( 33.7mm Round Black)

From £3.98

(ex. VAT)

An inline external tube connector for joining two tubes of the same diameter.

£4.84

(ex. VAT)

Expanding internal connector for joining sections of 42.4mm o/d tube, or other DDA fittings as and when required.

£4.84

(ex. VAT)

Expanding internal connector for joining sections of 42.4mm o/d tube, or other DDA fittings as and when required. Includes extra drilled holes as a fail safe measure.

150 Internal Expanding Connector (33.7mm Round Black)

From £4.85

(ex. VAT)

Expanding internal connector for joining sections of 26.9mm o/d tube, or other DDA fittings as and when required.

£6.91

(ex. VAT)

Elbow Connector for attaching the DDA-3 intermediate bracket or the DDA-4 handrail connector to the 48.3mm o/d upright.

£7.27

(ex. VAT)

Connector for attaching the DDA-3 intermediate bracket or the DDA-4 handrail connector to the 48.3mm o/d upright.

£12.59

(ex. VAT)

Bracket (made from Ductile Iron) for supporting the top or middle rail tube at an upright in conjunction with a 101-4(upright connector). The 42.4mm o/d tube is fixed to the DDA-3 using either 2 x self tapping screws or 2 x pop rivets.

£12.61

(ex. VAT)

Connector (made from Ductile Iron) for attaching the end of the 42.4mm o/d handrail tube at 90° to the 48.3mm o/d upright. This bracket is used in conjunction with 101-4(upright connector) and 150-3(expanding connector).