Pipeclamp Components
Hexagonal key. The allen key is the only tool required to tighten up a Pipeclamp fitting. The use of the dual ratchet Pipeclamp is recommended to achieve the required torque.
Hexagonal key. The allen key is the only tool required to tighten up a Pipeclamp fitting. The use of the dual ratchet Pipeclamp is recommended to achieve the required torque.
Hexagonal key. The allen key is the only tool required to tighten up a Pipeclamp fitting. The use of the dual ratchet Pipeclamp is recommended to achieve the required torque.
Hexagonal key. The allen key is the only tool required to tighten up a Pipeclamp fitting. The use of the dual ratchet Pipeclamp is recommended to achieve the required torque.
A 90 deg. tee connection between two tubes. Typical use is on straight and level guardrail to connect the vertical to the top rail or end/mid rail to the vertical (Kee Klamp compatible 10). This Key Clamp fitting cannot be used to join tubes in the top of the short tee. For this the Key Clamp fitting 104 Long Tee should be used.
A locking collar used as extra support for a Pipeclamp fitting on structures where the slip load on the grubscrew may be exceeded i.e. racking. Can also be used to support a Key Clamp fitting that is required to be left undone. i.e. a gate hinge.
A locking collar used as extra support for a Pipeclamp fitting on structures where the slip load on the grubscrew may be exceeded i.e. racking. Can also be used to support a Key Clamp fitting that is required to be left undone. i.e. a gate hinge.
Two piece clip together plastic moulding.
Provides butt connection for square tubes.
Black polyethylene base with tilting BZP steel stud on ball and socket.
Ideal for uneven or sloping floors
Our Threaded Tube inserts are designed for quick easy installation allowing you to cap off the end of the tube whilst forming a thread at the bottom for adjustable feet.
Black polyethylene base with tilting BZP steel stud on ball and socket.
Ideal for uneven or sloping floors
![119 Single Lugged Bracket ( Square 40 x 40) [duplicate]](https://images.globalwalkway.com/products/676/wall-mount-2.jpg?auto=format&w=350)
Often used for mounting boards practically flush with tubes. Fixing holes suit a wide range of common mechanical and chemical masonry anchors. The tube cannot be joined within the fitting.
Often used for mounting boards practically flush with tubes. Fixing holes suit a wide range of common mechanical and chemical masonry anchors. The tube cannot be joined within the fitting.
With 4 countersunk holes, this fitting is ideal as a flange to terminate handrail to a wall or other similar application. This key clamp fitting may be used on structures where it is only required as a positional fixing.
![184 Metal Stop Cap ( 33.7mm Round Black) [duplicate]](https://images.globalwalkway.com/products/740/184-metal-end-cap-1.jpg?auto=format&w=350)
The Key Clamp fitting is a metal stop end for sealing the open ends of tubes. This Key Clamp fitting is a drive in fit that is difficult to remove without the need for adhesive. For a plastic alternative use Pipeclamp fitting 133.
The Key Clamp fitting is a metal stop end for sealing the open ends of tubes. This Key Clamp fitting is a drive in fit that is difficult to remove without the need for adhesive. For a plastic alternative use Pipeclamp fitting 133.
Chain hook. Used to locate chains across openings. Not ideal for permanent chain location. Recommended that one end of the chain is fixed using a Key Clamp and held in place with a nut and bolt.
Often used for mounting boards practically flush with tubes. Fixing holes suit a wide range of common mechanical and chemical masonry anchors. The tube cannot be joined within the fitting.
Often used for mounting boards practically flush with tubes. Fixing holes suit a wide range of common mechanical and chemical masonry anchors. The tube cannot be joined within the fitting.
Two piece clip together plastic moulding.
Provides butt connection for square tubes.